5 Best Paint Scrapers Reviewed

5 Best Paint Scrapers Reviewed

The most important factor in achieving the finest paint finish is paint scraping. NO matter you are going to paint walls, furniture, a Ferrari, or even a Golden gate bridge, surface preparation is the key to achieve premium results.  

When repainting an old surface, it is important to remove and scrape off old paint, which can cause irregular surfaces, untidily look, or chipping. However, scraping off old paint is tough and tedious work; that’s is the real reason people don’t really like doing it regardless of how important it is.

But the good news is, a good paint scraper will make a lot of difference, and it will help you to get the job done faster and easier. Some people don’t realize the fact and try to scrape paint with a putty knife; it only makes matters worse, so investing in a good paint scraper worth the cost. Another misconception, all paint scrapers are not the same; even if they seem similar, the results vary.



Editor Rating

1). ABN Precision Scraper, Hook, and Pick Set

2). Bates Paint Scraper

3). Werxrite RetraGuard Razor Blade Scraper 

5). Tarvol Putty Knife Paint and Wall Scraper

5 Best Paint Scrapers

1. ABN Precision Scraper, Hook, and Pick Set

5 Best Paint Scrapers Reviewed

The all-in-one, ABN’s Scraper Set, comes with Ultra-fine tips and hooks in which will help you with intensive projects, especially the one which include metal and plastic surfaces. It includes

  • Small and large straight picks
  • Small and large full hooks
  • Small and large 45-degree hooks
  • Small and large 90-degree hooks
  • 1” scraper

This complete set of scrapers, hooks, and picks is worth your investment as it can be your partner in removing paint from hard-to-reach areas and surfaces. No matter it’s a wall paint application or a small DIY kitchen upgrade project, it helps to have a range of smaller tools to get a hand on every inch and corner for details.

It is made up of Steel shafts and rubber handles, which are durable and comfortable to work with. The best part is, the metal picks come with either chrome plating or a blackened finish, which is highly suitable to resist wear and tear. The Screwdriver-size tools are easy to work with and fit in hand perfectly and work great on a range of surfaces part of intricate projects.


  • Particular for small projects
  • Easy to work with rubber grips


  • Not suitable for large jobs

2. Bates Paint Scraper – Pack of 2 Putty Knife Scraper 5 in 1 Tool

This is a multipurpose, five-in-one tool that can complete multiple painting and scraping jobs without needing you to open up the toolbox. It can come in handy for many jobs like

  • open Paint can
  • scrape paint
  • open Box
  • Crown remove mold
  • use as a putty knife
  • use as a screwdriver
  • Hammer

It is made with stainless steel with a softwood grip, which enables you to do multiple tasks comfortably. It is named “Five-in-one,” which refers to the multiple functions of these tools that can be used as described above: scraper, screwdriver, paint can opener, hammer, crown molding remover, putty knife, and box opener. Thanks to the carbon steel sharp blades, you can complete multiple functions without purchasing extra sets of tools. Additionally, the extra softwood handle is extremely comfortable and durable. For painting jobs, the scrapers are pretty handy, especially when you want to open paint cans.

Straight-ground carbon steel blades are rust-resistant and retain their hard edge for a long time, and the manufacturer also offers a lifetime guarantee.


  • Multi-function convenience
  • Rust-resistant steel blade
  • Lifetime warranty
  • Several colors for camouflage.


  • The wood handle isn’t the most comfortable option


3. Werxrite RetraGuard Razor Blade Scraper Tool

This is an exceptional blade scraper with marvelous sharp edges, which makes it highly suitable for removing even the stickiest residue and paint. The Werxrite’s RetraGuard Tool is idyllic for smaller yet tough jobs. 

  • Includes five additional blades
  • Blade guard for protection
  • Tightener knob
  • Attachment loop for accessories

It comes with Sharp blades, which enable you to cut through the silicone, paint, sealant without making extra efforts, and with Werxrite’s razor tool, you can do even more. It comes with Five blades, this ideal tool, and swapping them out is as easy as turning a knob only; it will loosen each blade and then fasten a new one.

The most exceptional quality of this tool is its contoured handle which helps prolonged scraping more comfortable as compared to wielding a blade on its own. Additionally, the plastic casing assists as a safety feature to cover the blade when the tool isn’t in use.


  • Sharp blade for multiple surfaces/materials
  • Safety guard
  • Tool-free blade changing
  • Several colors for camouflage.


  • Must purchase replacement blades (at some point)

4. Tarvol Putty Knife Paint and Wall Scraper

Although this tool looks like an ordinary putty knife or scraper, you can easily find it in a hardware store, but as a matter of fact, there are serval reasons Tarvol’s Scraper is far better than them and an ideal tool for a range of projects.

  • 4” carbon steel blade
  • Flexible
  • Ergonomic handle

For instance, if you need it for basic scraping jobs, including ones that require the support of a hammer, this wide paint scraper is a perfect choice. Or, in case if you have a larger area to scrape and need an easy-grip handle to hang onto throughout the project, Tarvol’s putty knife and the scraper is your best friend.

It comes with a four-inch-wide blade which helps remove gunk from various surfaces, and its slight flex makes it suitable to be used as a putty knife. The classic design shouldn’t discourage those who want an old-fashioned basic scraper with dual functions and no-frills.


  • Manageable handle grip
  • Widespread blade
  • Perfectly flexible for applying compounds


  • Flexible blade may not work for all tough scraping jobs
  • Tough to remove the label from the blade


5. ORIENTOOLS Razor Blade Scraper with Long Handle

 This eleven-inch-long tool, ORIENTOOLS’ blade scraper, allows you to work on walls and even floors without putting in too much effort.

  • · Four-inch-wide blade
  • Long handle
  • Stainless steel
  • Tilted-edge precision blade

If you want to remove paint from old walls, this scraper with a long handle is a perfect choice. It is crafted efficiently with a long handle and non-slip grip, which enables you to reach difficult areas on the wall and use appropriate pressure without straining your wrists.

It comes with a four-inch-wide blade which gives you more coverage as compared to smaller blade scrapers. The best part of this model is, it is just as lightweight as only a few ounces. The blades can easily be swapped whenever you feel (must remove two screws to do so/turn the edge in for safety), but you’ll have to purchase them separately.


  • Long handle for reaching trouble zspots/scrapping walls
  • handle grip is Non-slip


  • have to remove screws to change the blade in ‘safe’ mode
  • requires spare blades at some point

Buying guide:

How to Find the Best Paint Scrapers

Getting a cheap paint scraper from any nearby hardware store may seem like a good idea, but after you’ve consumed hours battling on with stuck-on wallpaper, paint, or other materials, you’ll understand where you were mistaken. We have designed a comprehensive guide about how to find the best paint scraper for any job and what features to look for.


It can be pretty odd to mention that paint scrapers be multiple purposes, but it’s true. Some paint scrapers come with edges for uses, such as opening paint cans or smoothing mixtures, while others may be useful for other household tasks. 

For example, a razor blade paint scraper is also great for removing sticky labels from containers, swapping out is of your vehicle registration tags, and other common jobs at home.

Size and Span

If you want to remove paint off the entire wall (or four), a paint scraper with a larger blade will make things easier. However, if you have a small-scale project, a narrower scraper will get the job done without additional effort.

Think about the size of your project or the most common applications and pick accordingly.

Straight vs. Curved

Curved scrapers are a great choice if you want to remove paint from corners and curves. so, you might find a curved blade a better fit for some projects. However, in most cases, a straight scraper is probably enough to eliminate paint and other filth. For scraping crown molding, cabinetry, and other smaller-scale projects, curved blades work better.


You can pick up any plastic scraper at most hardware stores, but for scrapping paint, it’s worth deciding on wood or metal. Most paint scrapers have wood, plastic, or metal handles with blades, while other tools use one component all over.

Depending on your task’s nature and how rugged a paint scraper you need, an all-plastic or all-metal tool might be perfect. Do keep an eye on the working surface as well; removing paint from a wall is massively different from lifting it off a plastic surface or a car.

Handle Type and Materials

In the case of scrapers with a separate handle, it’s nothing but a variety of materials manufacturers use. Many manufacturers lean toward plastic these days as it’s durable and economical. However, Wood and metal handles are still a popular option with many paint scrapers.

In many cases, creators coat the paint scrappers’ handles with a grippy material to help make the working experience for prolonged projects more comfortable. Consider whether this is a necessity for you; on the other hand, think about how well a rubber handle will hold up compared to an all-metal or Wood one.

Replacement Parts and Maintenance

Either plastic or metal with razor blade scrapers, you’ll be looking for spare parts throughout the life of the tool. In some cases, it’s easy to find spare parts, but with others, it may become a nuisance trying to track down the right blade fit or other accessories—things are something worth considering before you buy any tool.

On the contrary, some scrapers will need sharpening at some point to extend their life. At that point, you can either invest in maintenance, replace the tool, or go the DIY route for any sharpening or other needs.


Why shouldn’t I go for a local paint scrapper at a hardware store?

Traditional paint scrapers may not work well; hence they are NOT recommended. A high-quality paint scraper is essential to achieve excellent results. Cheap and low-quality scrapers found in many paint stores may not be able to give outstanding results. These scrapers are top-quality material, manufactured to the highest standards, and comes with a guarantee. They have an exceptionally sharp blade, and they have been designed to do the least amount of damage to the surface.

When can I start painting after stripping?

As soon as you finish, preferably the same day, depending on the surface you are scrapping and the moisture level on the surface. 

What is the best way to sharpen the scrapers?

 Keeping the blade sharp is crucial. If the blade is not sharp enough, it will make the removal process take twice as long and twice as hard. You can use a diamond lap sharpener or go for a blade replacement. Both ways are inexpensive and easy to use.

Why must paint be removed?

From maintenance and extending the life span perspective, removing old paint from walls and other surfaces are necessary. If the previous paint layer is too thick, the paint will crack, and re-painting will only offer temporary defense before the paint cracks and flakes again. On the other hand, when old paint is removed, it creates the opportunity to begin re-painting using up-to-date deep-penetrating undercoats that offer excellent adhesion for the paint.

If the painting work is carried out appropriately, you can have a problem-free surface for at least 30-40 years that only needs regular maintenance. Keep in mind that paints age and their adhesion to the lowest layer diminutions regardless of whether the outlook is well or poorly maintained. The former layer of paint is usually held accountable for peeling; as a matter of fact, it is the first layer that no longer has sufficient adhesion. Don’t overlook that paint is only as good as the lowest undercoat.

Click Here to Leave a Comment Below

Leave a Reply: